Mounting Plates

From Arcade Otaku Wiki
Jump to navigation Jump to search

Mounting Plates are used to secure arcade sticks to various panels. As the mounting holes on the arcade stick may not line up with the panel, a mounting plate is used to connect the two.

All information and measurement images taken from the Akihabara Shop website. Akibhabara stock a wide range of mounting plates and other arcade gear, so please consider using them for your next order.

JLF-P-1

Manufacturer: Sanwa
Flat mounting plate for JLF-TP-8Y.
Size: 95x53x1.6(millimeters).

JLF-P-1S

Manufacturer: Sanwa
"S"-shaped mounting plate for JLF-TP-8Y.
Size: 108x53x1.6(millimeters).

JLW-P-1B

Manufacturer: Sanwa
Flat mounting plate for JLW-TM-8.
Size: 95.2x78.1x2(millimeters).

MS

Manufacturer: Seimitsu
Flat mounting plate for Seimitsu LS-33/LS-33-01, LS-55/LS-55-01 and LS-56/LS-56-01.
Size: 95x50x1.6(millimeters).

NA

Manufacturer: Seimitsu
"S"-shaped mounting plate for Seimitsu LS-32/LS-32-01 and LS-40/LS-40-01.
Size: 117.3x65x1.6(millimeters).

P-40

Manufacturer: Seimitsu
Flat mounting plate that has the same size as the Seimitsu RE-mounting plate but for Seimitsu LS-33/LS-33-01, LS-55/LS-55-01 and LS-56/LS-56-01.
Size: 97x65x1.6(millimeters).

RE

Manufacturer: Seimitsu
Flat mounting plate for Seimitsu LS-32/LS-32-01 and LS-40/LS-40-01.
Size: 97.1x65x1.6(millimeters).

SS

Manufacturer: Seimitsu
"S"-shaped mounting plate for Seimitsu LS-32/LS-32-01 and LS-40/LS-40-01.
Size: 91.6x65x1.6(millimeters).

VF

Manufacturer: Seimitsu
Flat and short mounting plate for Seimitsu LS-33/LS-33-01, LS-55/LS-55-01 and LS-56/LS-56-01.
Size: 75x65x1.6(millimeters).