Wei-ya M3192D

From Arcade Otaku Wiki
Jump to navigation Jump to search

Size: 29" Flat tube Sync: 15/24/31 Chassis: Wei Ya C3129DB

Manuals

Instructions

Chassis Circuit Diagrams

M3129DB1-72.pdf

M3129D01-7_M3129D01-72_(C3129D01-72).pdf

Modifications

The Wei-Ya 3129 chassis is known for having quite a few quirks. Members of the community have researched and/or documented various modifications to improve performance and quality of these chassis:

  • Replace the resistor at R111 with a 0.68 ohm, 1W, 350V resistor to enhance vertical overscan. (Archived from the original)
  • If you're having issues with pincushion adjustment, check the capacitor at position C76 and ensure it is 1uF, 50V. Also, check continuity from this cap to the adjacent IC10; if there is no continuity, bridge IC10 and C76. (Archived from the original)
  • The soldering on these chassis is generally known to be suspect at best; consider reflowing as much as you can with fresh, leaded solder.
  • These chassis run hot. Very hot. Consider installing a fan to blow cool air across and over the chassis while in use.