File:Sanwa PM1736 Chassis Cap Map.png

2025-06-20T19:08:13Z

Mourix:

Sanwa PM1736

2025-06-10T18:39:24Z

Mourix:

Sanwa PM1736

2025-06-09T21:44:40Z

Mourix:

Sanwa PM1736

2025-06-09T21:44:16Z

Mourix:

[[Category:Monitors]]
[[Category:Repairs]]
[[File:PM1736 Chassis.png|400px|thumb|right|PM1736 Chassis]]
[[File:PM1736 Neck.png|200px|thumb|right|PM1736 Neck]]

Arcade monitor found in [[Sega Aero City]].
*Size: 26" curved Tube
*Sync: 15kHz (and possibly 24 kHz as there is cable labeled "horizontal frequency switching" at CN801/CN802).

=== Notes ===
*Should be a drop in replacement to the [[Nanao MS8]].
*The red jumper cable connects to pin N for narrow image and W for wide image (stretch).

2025-06-09T21:08:31Z

Mourix:

Sanwa PM1736

2025-06-09T21:07:42Z

Mourix:

File:PM1736 Neck.png

2025-06-09T21:06:23Z

Mourix:

2025-03-23T21:22:45Z

Mourix: /* Cabinet Art */

File:AWSD Regulatory-Sticker.zip

2025-03-23T21:17:10Z

Mourix:

File:AWSD Player2-Sticker.zip

2025-03-23T21:17:00Z

Mourix:

2025-01-13T12:47:05Z

Mourix:

Wei-Ya M3129D01-7 Cap Guide

2025-01-13T12:46:27Z

Mourix:

Cap Guide for the [[Wei-ya M3192D]].

'''Make sure you are very experienced with a soldering iron or you WILL end up with a dead monitor.'''

This is one of the hardest boards to recap due to the sheer amount of caps, leaded solder issues, lifting pads and capacitor substitutions.

[[File:Wei-Ya M3129D01-7 Chassis.jpg|500px]]

==Main Board cap guide==
[[File:Wei-Ya M3129D01-7 Mainboard Cap Map.png|650px]]
{| class="wikitable sortable"
! Location !! Value !! Voltage !! Diameter !! Height !! Pitch !! Brand !! Model !! Type !! Possible replacement
|-
| C5 || 1000 || 200 || 25 || 47 || 10 || TK || LG || GP || ELXS201VSN102MP50S
|-
| C25 || 100 || 160 || 16 || 25 || 7 || MIEC || ? || GP || EEU-ED2C101S
|-
| C29 || 100 || 160 || 16 || 25 || 7 || MIEC || ? || GP || EEU-ED2C101S
|-
| C23 || 47 || 250 || 13 || 22 || 5 || MIEC || ? || GP || EEU-ED2E470B
|-
| C58 || 1000 || 35 || 13 || 22 || 5 || Giant || ? || GP || EEU-EB1V102
|-
| C65 || 2200 || 35 || 13 || 30 || 5 || Giant || ? || GP || EEU-HD1V222
|-
| C82 || 4.7 || 75 || 16 || 32 || 7 || MIEC || ? || BIPOLAR 5A || ??
|-
| C29 || 220 || 100 || 13 || 22 || 5 || MIEC || ? || GP || ECA-2AHG221B
|-
| C31 || 470 || 35 || 10 || 20 || 5 || Giant || GB || GP || EEU-EB1V471B
|-
| C30 || 1000 || 35 || 13 || 22 || 5 || Giant || GB || GP || EEU-EB1V102
|-
| C37 || 470 || 25 || 10 || 20 || 5 || Giant || GB || GP || EEU-EB1V471B
|-
| C35 || 470 || 25 || 10 || 20 || 5 || Giant || GB || GP || EEU-EB1V471B
|-
| C55 || 100 || 50 || 10 || 12 || 5 || Giant || ? || GP || EEU-EB1H101SB
|-
| C59 || 220 || 35 || 8 || 15 || 5 || Giant || ? || GP || EEU-EB1V221B
|-
| C60 || 1 || 50 || 5 || 11 || 5 || Giant || ? || GP || MKS2C041001F00MSSD
|-
| C61 || 47 || 50 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1J470SB
|-
| C54 || 1 || 50 || 5 || 11 || 5 || Giant || ? || GP || MKS2C041001F00MSSD
|-
| C62 || 1 || 50 || 5 || 11 || 5 || Giant || ? || GP || MKS2C041001F00MSSD
|-
| C50 || 10 || 50 || 5 || 11 || 5 || Giant || ? || GP || EEU-EB1H100SB
|-
| C47 || 100 || 16 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1E101SB
|-
| C45 || 100 || 16 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1E101SB
|-
| C38 || 100 || 16 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1E101SB
|-
| C39 || 100 || 20 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1E101SB
|-
| C36 || 100 || 20 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1E101SB
|-
| C33 || 10 || 350 || 10 || 15 || 5 || MIEC || ? || GP || EEU-EB2V100
|-
| C34 || 10 || 350 || 10 || 15 || 5 || MIEC || ? || GP || EEU-EB2V100
|-
| C20 || 10 || 50 || 5 || 11 || 5 || Giant || ? || GP || EEU-EB1H100SB
|-
| C22 || 100 || 16 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1E101SB
|-
| C15 || 100 || 20 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1E101SB
|-
| C10 || 220 || 25 || 8 || 11 || 5 || S.I. || ? || GP || EEU-EB1V221B
|-
| C17 || 4.7 || 50 || 5 || 11 || 5 || Giant || ? || GP || EEU-EB1H4R7SB
|-
| C72 || 10 || 50 || 5 || 11 || 5 || Giant || ? || GP || EEU-EB1H100SB
|-
| C73 || 10 || 50 || 5 || 11 || 5 || Giant || ? || GP || EEU-EB1H100SB
|-
| C74 || 10 || 50 || 5 || 11 || 5 || Giant || ? || GP || EEU-EB1H100SB
|-
| C76 || 1 || 50 || 5 || 11 || 5 || Giant || ? || GP || MKS2C041001F00MSSD
|-
| C78 || 1 || 50 || 5 || 11 || 5 || Giant || ? || GP || MKS2C041001F00MSSD
|-
| C81 || 100 || 50 || 10 || 12 || 5 || Giant || ? || GP || EEU-EB1H101SB
|-
| C82 || 100 || 50 || 10 || 12 || 5 || Giant || ? || GP || EEU-EB1H101SB
|-
| C69 || 1000 || 16 || 10 || 18 || 5 || S (R) || ? || GP || EEU-EB1C102
|-
| C68 || 3.3 || 50 || 5 || 11 || 5 || Giant || ? || GP || EEU-EB1H3R3SB
|-
| C94 || 1 || 50 || 5 || 11 || 5 || Giant || ? || GP || MKS2C041001F00MSSD
|-
| C95 || 1 || 250 || 6 || 11 || 5 || MIEC || ? || GP || ECA-2EHG010
|-
| C90 || 1 || 250 || 6 || 11 || 5 || MIEC || ? || GP || ECA-2EHG010
|-
| C32 || 10 || 400 || 10 || 17 || 5 || Giant || ? || GP || EEU-EB2G100
|}

==Neck Board cap guide==
[[File:Wei-Ya M3129D01-7 Neckboard Cap Map.png|350px]]
{| class="wikitable sortable"
! Location !! Value !! Voltage !! Diameter !! Height !! Pitch !! Brand !! Model !! Type !! Possible replacement
|-
| C29 || 47 || 250 || 13 || 21 || 5 || MIEC || ? || GP || EEU-ED2E470B
|-
| C18 || 1 || 250 || 6 || 11 || 5 || MIEC || ? || GP || ECA-2EHG010
|-
| C19 || 1 || 250 || 6 || 11 || 5 || MIEC || ? || GP || ECA-2EHG010
|-
| C20 || 1 || 250 || 6 || 11 || 5 || MIEC || ? || GP || ECA-2EHG010
|-
| C7 || 10 || 50 || 5 || 11 || 5 || Giant || ? || GP || EEU-EB1H100SB
|-
| C9 || 10 || 50 || 5 || 11 || 5 || Giant || ? || GP || EEU-EB1H100SB
|-
| C11 || 10 || 50 || 5 || 11 || 5 || Giant || ? || GP || EEU-EB1H100SB
|-
| C4 || 10 || 50 || 5 || 11 || 5 || Giant || ? || GP || EEU-EB1H100SB
|-
| C6 || 47 || 25 || 5 || 11 || 5 || Giant || ? || GP || ECA-1EHG470B
|-
| IC1 || 220 || 25 || 8 || 11 || 5 || S.I. || ? || GP || EEU-EB1V221B
|-
| C14 || 220 || 25 || 8 || 11 || 5 || S.I. || ? || GP || EEU-EB1V221B
|-
| C17 || 100 || 25 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1E101SB
|-
| C31 || 100 || 25 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1E101SB
|-
| C23 || 1 || 350 || 8 || 11 || 5 || MIEC || ? || BIPOLAR || 860021373003 2x series
|-
| C22 || 1 || 350 || 8 || 11 || 5 || MIEC || ? || BIPOLAR || 860021373003 2x series
|-
| C21 || 1 || 350 || 8 || 11 || 5 || MIEC || ? || BIPOLAR || 860021373003 2x series
|}

==Daughter Board cap guide==
[[File:Wei-Ya M3129D01-7 Daughterboard Cap Map.png|250px]]
{| class="wikitable sortable"
! Location !! Value !! Voltage !! Diameter !! Height !! Pitch !! Brand !! Model !! Type !! Possible replacement
|-
| C6 || 10 || 50 || 6 || 11 || 5 || Giant || ? || BIPOLAR || ECA1HEN100
|-
| C5 || 47 || 16 || 5 || 11 || 5 || Giant || ? || GP || ECA-1EHG470B
|-
| C3 || 100 || 16 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1E101SB
|-
| C4 || 100 || 16 || 6 || 11 || 5 || Giant || ? || GP || EEU-EB1E101SB
|}
[[Category:Monitors]]

Taito Egret 3

2025-01-11T16:07:36Z

Mourix:

{{Infobox cabinet
|name = Taito Egret 3
|kana = イーグレット3
|romaji = IGURETTO 3
|aka = Egret III
|image = Egret3.jpg
|type = Sitdown
|year = 2002
|depth = 903
|width = 750
|height = 1450 (1765 including Marquee)
|wiring = [[JAMMA]]/Half [[JVS]]
|monitor_size = 29
|monitor_sync = 15/24/31
|monitor_model = Toshiba
|rotatable = Yes
|rotate_mech = No
|weight = 110
|power_supply = Taito JVS (3.3v/5v/12v)
|power = 100
}}
Successor to the [[Taito Egret II]] that removed the screen rotation mechanism but did upgrade the monitor itself to flat screen tri-sync.
==Additional photos==
<gallery>
Image:egret3_front.jpg|Front
Image:egret3_right.jpg|Right
Image:egret3_back.jpg|Back
Image:Egret3_insideCP.jpg|Inside control panel
Image:Egret3_2L12Bpanel.jpg|2L12B control panel
Image:1.jpg
Image:2.jpg
Image:E3_toshiba_remote.jpg
</gallery>

==Manuals==
*[[Media:e2e3awsdmeasurements.jpg|Cabinet Dimensions]]
*[[Media:e3parts.pdf|Parts listing]]
*[[Media:M3129D01-7 M3129D01-72 (C3129D01-72).pdf |Wei-Ya M3129D01-7 M3129D01-72 Schematic]]

==Scans==
*[https://imgur.com/a/4ACO1lr 1L6B Control Panel] (600dpi; courtesy of St4rgalaqtic from Arcade-Projects Forums)

==Marquee Hardware==
Thanks to '''themisterfalcon''' for this information.

For the bracket:
2x M4 JIS flat head: https://www.mcmaster.com/browse-fasteners/thread-size~m4/jis-stainless-steel-flat-head-screws/
Stock thread length is 10mm
2x M4 Countersunk Washers: https://www.mcmaster.com/browse-fasteners/washers/for-screw-size~m4/countersunk-washers/

For the marquee itself:
3x M4 extra-wide head Philips: https://www.mcmaster.com/browse-fas...-steel-extra-wide-truss-head-phillips-screws/
Stock thread length is 8mm
3x M4 stainless cap nuts: https://www.mcmaster.com/browse-fas...osion-resistant-316-stainless-steel-cap-nuts/

== Monitor / Chassis Swap Information ==
The Wei-Ya chassis typically used in the Egret 3 and the Atomiswave SD (Wei-Ya 3129D) is generally considered to be of inferior quality compared to offerings from competitors such as Toshiba and Sanwa. Unfortunately, there is no direct replacement for neither the monitor nor the chassis, but several options have been theorized or successfully completed by community members:
*[https://archive.ph/8kX2i Toshiba chassis swap on the original monitor, archived from the original post on Arcade-Projects.] Refer to the second post of the thread for detailed instructions.

==Notes==
*The largest PCB board that can be fitted is 550x392x12mm.
*The cabinet can be upgraded with a sound amp easily as it is wired with the necessary 12v and speaker connections for a [[Taito Stereo Amp]].
[[Category:Taito]]