View source for CPS1, CPS2 & CPS3 Connectors

[[Category:Connectors_and_Cables]]
Part numbers for CPS1 and CPS2/3 kick harness connectors and pins

==CPS1==



{| class="wikitable"
|+ Pinout for 6 button games (such as Street Fighter)
|-
! scope="row" | Pin #
| 1 || 2 || 3 || 4 || 5 || 6 || 7 || 8 || 9 || 10
|-
! scope="row" | Function
| GND || GND || P1 B4 || P1 B5 || P1 B6 || (N/C) || P2 B4 || P2 B5 || P2 B6 || (N/C)
|}


{| class="wikitable"
|+ Pinout for 3/4 player games (such as Saturday Night Slam Masters)
|-
! scope="row" | Pin #
| 1 || 2 || 3 || 4 || 5 || 6 || 7 || 8 || 9 || 10
|-
! scope="row" | Function
| GND || GND || P3/4 Right || P3/4 Left || P3/4 Down || P3/4 Up || P3/4 B1 || P3/4 B2 || P3/4 Coin || P3/4 Start
|}

P3 B3 and P4 B3 are on the jamma edge connector, pins 25 and c respectively.


'''H10P-SHF-AA''' - 10 Pin Female connector<br>
'''SHF-001T-0.8BS''' - Pins<br>

==CPS2/3==



{| class="wikitable"
|+ Pinout for 6 button games (such as Street Fighter)
|-
! Function
! colspan="2" | Pin #
! Function
|-
| GND || 1 || 2 || GND
|-
| || 3 || 4 ||
|-
| (+12V) || 5 || 6 || (+12V)
|-
| || 7 || 8 ||
|-
| P2 B6 || 9 || 10 ||
|-
| || 11 || 12 ||
|-
| || 13 || 14 ||
|-
| P1 B6 || 15 || 16 ||
|-
| P1 B5 || 17 || 18 ||
|-
| P1 B4 || 19 || 20 ||
|-
| P2 B4 || 21 || 22 ||
|-
| P2 B5 || 23 || 24 ||
|-
| || 25 || 26 ||
|-
| || 27 || 28 ||
|-
| || 29 || 30 ||
|-
| || 31 || 32 ||
|-
| GND || 33 || 34 || GND
|}


{| class="wikitable"
|+ Pinout for 3/4 player games (such as Dungeons & Dragons)
|-
! Function
! colspan="2" | Pin #
! Function
|-
| GND || 1 || 2 || GND
|-
| || 3 || 4 ||
|-
| (+12V) || 5 || 6 || (+12V)
|-
| P3 Lock || 7 || 8 || P4 Lock
|-
| P3 Coin || 9 || 10 || P4 Coin
|-
| P3 Start || 11 || 12 || P4 Start
|-
| P3 Up || 13 || 14 || P4 Up
|-
| P3 Down || 15 || 16 || P4 Down
|-
| P3 Left || 17 || 18 || P4 Left
|-
| P3 Right || 19 || 20 || P4 Right
|-
| P3 B1 || 21 || 22 || P4 B1
|-
| P3 B2 || 23 || 24 || P4 B2
|-
| P3 B3 || 25 || 26 || P4 B3
|-
| P3 B4 || 27 || 28 || P4 B4
|-
| || 29 || 30 ||
|-
| || 31 || 32 ||
|-
| GND || 33 || 34 || GND
|}


'''DF1B-34DS-2.5RC''' - 34 Pin female connector <br>
'''DF1B-2022SC''' - Pins<br>

'''DF1BZ-34DP-2.5DSA''' - 34 Pin male connector that can be used as a CPS2/3 --> CPS1 adapter in conjunction with '''H10P-SHF-AA''' for 6 button games<br>
Although the pinouts are different for a 3 player game, a simple move of cable/pin 9 (Coin) to 6 (Up) on the '''H10P-SHF-AA''' end actually maps out nicely when connected to a AvP 3p harness! 
The game will need to be set to single chute/freeplay as Player 3 will no longer have coin input connected.

==Other connections==
If your cabinet (Sega, Konami...) has an internal 10 pin harness installed, the following connector can be used for 6 button games.<br>
'''176277-1''' - 10 Pin male connector <br>
'''175152-1''' - Pins

{| class="wikitable"
|-
| 1 - P1 Button 4 || 2 - P1 Button 5 || 3 - P1 Button 6 || 4 - P1 Ground || 5 - P2 Button 4
|-
| 6 - P2 Button 5 || 7 - P2 Button 6 || 8 - P2 Ground || 9 - N/C || 10 - N/C 
|}


Cabinets such as the Taito Egret II have a different internal setup, and require the CPS1/2/3 harness to either be wired directly from game board to control panel, or a JAMMA adapter with harness attachment. The control panel side will possibly require extra cables for buttons 5 & 6

{| class="wikitable"
|-
| '''DF1B-34DS-2.5RC''' ||   '''JAMMA'''   || '''Function''' || '''Control Panel "J"''' || '''Control Panel "K"'''
|-
| 19 || c || P1 Button 4 || 9 ||
|-
| 17 || d || P1 Button 5 || 10 ||
|-
| 21 || 25 || P2 Button 4 ||  || 9
|-
| 23  || 26 || P2 Button 5 ||  || 10
|-
| 33 || 27/28 || P1 Ground || 12 ||
|-
| 34 || e/f ||  P2 Ground ||  || 12
|}

{| class="wikitable"
|-
| '''DF1B-34DS-2.5RC''' || '''[[JST YL]] "S"''' || '''Function''' || '''Contol Panel "J"''' || '''Control Panel "K"'''
|-
| 9 || 2 || P2 Button 6 || 11 ||
|-
| 15 || 1 || P1 Button 6 ||  || 11
|}

==Where to get them==
http://www.gateninety.com/


<gallery>
File:10pin CP.jpg|Control Panel
10pin.jpg|Cabinet
CPS1_10pin.jpg|CPS1 adaptor
CPS2 10pin.jpg|CPS2/3 adaptor
CPS2_CPS1.jpg|CPS2/3 to CPS1 adaptor
JAMMA_CPS2_E2.jpg|Egret II JAMMA to CPS2 adaptor
</gallery>