Taito Egret 3 - Revision history

Mourix at 16:07, 11 January 2025

2025-01-11T16:07:36Z

← Older revision		Revision as of 16:07, 11 January 2025
Line 20:		Line 20:
	\|power = 100		\|power = 100
	}}		}}
	Successor to the [[Taito Egret II]] that removed the screen rotation mechanism but did upgrade it to a tri-sync.		Successor to the [[Taito Egret II]] that removed the screen rotation mechanism but did upgrade the monitor itself to flat screen tri-sync.
	==Additional photos==		==Additional photos==
	<gallery>		<gallery>

Mourix at 16:07, 11 January 2025

2025-01-11T16:07:08Z

← Older revision		Revision as of 16:07, 11 January 2025
Line 20:		Line 20:
	\|power = 100		\|power = 100
	}}		}}

	Successor to the [[Taito Egret II]] that removed the screen rotation mechanism but did upgrade it to a tri-sync.		Successor to the [[Taito Egret II]] that removed the screen rotation mechanism but did upgrade it to a tri-sync.
	==Additional photos==		==Additional photos==

Mourix at 01:04, 14 December 2024

2024-12-14T01:04:17Z

← Older revision		Revision as of 01:04, 14 December 2024
Line 21:		Line 21:
	}}		}}

	~~Succesor~~ to the [[Taito Egret II]].		Successor to the [[Taito Egret II]] that removed the screen rotation mechanism but did upgrade it to a tri-sync.
	==Additional photos==		==Additional photos==
	<gallery>		<gallery>

Mourix at 01:02, 14 December 2024

2024-12-14T01:02:12Z

← Older revision		Revision as of 01:02, 14 December 2024
Line 20:		Line 20:
	\|power = 100		\|power = 100
	}}		}}

			Succesor to the [[Taito Egret II]].
	==Additional photos==		==Additional photos==
	<gallery>		<gallery>

Mourix at 01:00, 14 December 2024

2024-12-14T01:00:08Z

← Older revision		Revision as of 01:00, 14 December 2024
Line 20:		Line 20:
	\|power = 100		\|power = 100
	}}		}}
	~~The cabinet can be upgraded with a sound amp easily as it is wired with the necessary 12v and speaker connections for a [[Taito Stereo Amp]].~~
	==Additional photos==		==Additional photos==
	<gallery>		<gallery>
Line 34:		Line 33:

	==Manuals==		==Manuals==
	* [[Media:e2e3awsdmeasurements.jpg\|Cabinet Dimensions]]		*[[Media:e2e3awsdmeasurements.jpg\|Cabinet Dimensions]]
	* [[Media:e3parts.pdf\|Parts listing]]		*[[Media:e3parts.pdf\|Parts listing]]
	* [[Media:M3129D01-7 M3129D01-72 (C3129D01-72).pdf \|~~Schematic for~~ M3129D01-7 M3129D01-72 ~~(C3129D01-72)~~]]		*[[Media:M3129D01-7 M3129D01-72 (C3129D01-72).pdf \|Wei-Ya M3129D01-7 M3129D01-72 Schematic]]

	==Scans==		==Scans==
	* [https://imgur.com/a/4ACO1lr 1L6B Control Panel] (600dpi; courtesy of St4rgalaqtic from Arcade-Projects Forums)		*[https://imgur.com/a/4ACO1lr 1L6B Control Panel] (600dpi; courtesy of St4rgalaqtic from Arcade-Projects Forums)

	==Marquee Hardware==		==Marquee Hardware==
Line 56:		Line 55:
	== Monitor / Chassis Swap Information ==		== Monitor / Chassis Swap Information ==
	The Wei-Ya chassis typically used in the Egret 3 and the Atomiswave SD (Wei-Ya 3129D) is generally considered to be of inferior quality compared to offerings from competitors such as Toshiba and Sanwa. Unfortunately, there is no direct replacement for neither the monitor nor the chassis, but several options have been theorized or successfully completed by community members:		The Wei-Ya chassis typically used in the Egret 3 and the Atomiswave SD (Wei-Ya 3129D) is generally considered to be of inferior quality compared to offerings from competitors such as Toshiba and Sanwa. Unfortunately, there is no direct replacement for neither the monitor nor the chassis, but several options have been theorized or successfully completed by community members:
	* [https://archive.ph/8kX2i Toshiba chassis swap on the original monitor, archived from the original post on Arcade-Projects.] Refer to the second post of the thread for detailed instructions.		*[https://archive.ph/8kX2i Toshiba chassis swap on the original monitor, archived from the original post on Arcade-Projects.] Refer to the second post of the thread for detailed instructions.
	*

	==Notes==		==Notes==
	The largest PCB board that can be fitted is 550x392x12mm.		*The largest PCB board that can be fitted is 550x392x12mm.
			*The cabinet can be upgraded with a sound amp easily as it is wired with the necessary 12v and speaker connections for a [[Taito Stereo Amp]].
	[[Category:Taito]]		[[Category:Taito]]

Kazuo: addedd marquee hardware & monitor info

2022-05-27T07:47:34Z

addedd marquee hardware & monitor info

New page

{{Infobox cabinet
|name = Taito Egret 3
|kana = イーグレット3
|romaji = IGURETTO 3
|aka = Egret III
|image = Egret3.jpg
|type = Sitdown
|year = 2002
|depth = 903
|width = 750
|height = 1450 (1765 including Marquee)
|wiring = [[JAMMA]]/Half [[JVS]]
|monitor_size = 29
|monitor_sync = 15/24/31
|monitor_model = Toshiba
|rotatable = Yes
|rotate_mech = No
|weight = 110
|power_supply = Taito JVS (3.3v/5v/12v)
|power = 100
}}
The cabinet can be upgraded with a sound amp easily as it is wired with the necessary 12v and speaker connections for a [[Taito Stereo Amp]].
==Additional photos==
<gallery>
Image:egret3_front.jpg|Front
Image:egret3_right.jpg|Right
Image:egret3_back.jpg|Back
Image:Egret3_insideCP.jpg|Inside control panel
Image:Egret3_2L12Bpanel.jpg|2L12B control panel
Image:1.jpg
Image:2.jpg
Image:E3_toshiba_remote.jpg
</gallery>

==Manuals==
* [[Media:e2e3awsdmeasurements.jpg|Cabinet Dimensions]]
* [[Media:e3parts.pdf|Parts listing]]
* [[Media:M3129D01-7 M3129D01-72 (C3129D01-72).pdf |Schematic for M3129D01-7 M3129D01-72 (C3129D01-72)]]

==Scans==
* [https://imgur.com/a/4ACO1lr 1L6B Control Panel] (600dpi; courtesy of St4rgalaqtic from Arcade-Projects Forums)

==Marquee Hardware==
Thanks to '''themisterfalcon''' for this information.

For the bracket:
2x M4 JIS flat head: https://www.mcmaster.com/browse-fasteners/thread-size~m4/jis-stainless-steel-flat-head-screws/
Stock thread length is 10mm
2x M4 Countersunk Washers: https://www.mcmaster.com/browse-fasteners/washers/for-screw-size~m4/countersunk-washers/

For the marquee itself:
3x M4 extra-wide head Philips: https://www.mcmaster.com/browse-fas...-steel-extra-wide-truss-head-phillips-screws/
Stock thread length is 8mm
3x M4 stainless cap nuts: https://www.mcmaster.com/browse-fas...osion-resistant-316-stainless-steel-cap-nuts/

== Monitor / Chassis Swap Information ==
The Wei-Ya chassis typically used in the Egret 3 and the Atomiswave SD (Wei-Ya 3129D) is generally considered to be of inferior quality compared to offerings from competitors such as Toshiba and Sanwa. Unfortunately, there is no direct replacement for neither the monitor nor the chassis, but several options have been theorized or successfully completed by community members:
* [https://archive.ph/8kX2i Toshiba chassis swap on the original monitor, archived from the original post on Arcade-Projects.] Refer to the second post of the thread for detailed instructions.
*

==Notes==
The largest PCB board that can be fitted is 550x392x12mm.

[[Category:Taito]]