Image Fight Repair Logs

From Arcade Otaku Wiki
Revision as of 00:41, 27 September 2012 by Davewellington (talk | contribs) (Created page with "'''Repairer:''' [http://www.aussiearcade.com.au/member.php/3136-VectorGlow VectorGlow]<br> '''Forum Thread:''' [http://www.aussiearcade.com.au/showthread.php/23430-Image-Fight...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Repairer: VectorGlow
Forum Thread: Image Fight PCB Repair

Symptom: One of the background layers of graphics (those drawn by the four ‘A’ EPROMs on the lower board) were being drawn *and* erased in a line in the centre of the screen, also looked as if graphics about to be drawn at the top were being drawn in the middle
Cure: Bad LS86 at location IC50 on the lower board – replaced


Repair Logs converted to wiki format by Brad from Aussie Arcade.

Retrieved from ‘https://wiki.arcadeotaku.com/index.php?title=Image_Fight_Repair_Logs&oldid=7954’