Molex KK

From Arcade Otaku Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Molex kk 2695.png

  • 2695 serie: 2.54mm ( .100" ) pitch ( same as JST NH )
  • 5239 serie: 3.96mm ( .156" ) pitch with full width ramp

All these are available with different ramps/locking tabs than the models documented here.


Datasheet/Manual

2695 serie Datasheet

Part numbers

2695 serie

  • 22-01-2087 - 8 pins
  • ...
  • 22-01-2167 - 16 pins

Pins

  • 08-52-0101

5239 serie

  • 0009524044 - 4 pins
  • ...
  • 0009524154 - 15 pints

pins:

  • 0008550104

What they used for

the 2.54mm connectors are an alternative to JST NH connectors.

The 3.96mm connectors are used in a variety of places

  • spinner/trackball pcb connectors
  • chassis connectors ( WellsGardner )

What they look like

Removing pins

Super easy - just hold down the locking pin with a fine tweezer or similar, and pull out.

Where to get them

https://www.arcadepartsandrepair.com/product-category/connectors-sockets-pins/100-kk-molex/

https://www.arcadepartsandrepair.com/product-category/connectors-sockets-pins/156-kk-molex/

http://digikey.com

http://mouser.com