Pinball Action Repair Logs

From Arcade Otaku Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Repairer: channelmaniac

Tip: Wiring a JAMMA adapter

When wiring a JAMMA adapter for this game, be aware that the edge connector is pinned out different than the manual.

The edge connector on top of the board is labeled from B1 through B18 and on the bottom of the board is labeled from A1 through A18.

The manual shows pinouts from pin 1 through pin 36.

When trying to wire the board be aware that pin 1 is A1 and is on the BOTTOM of the board, not the top. Pin 2 is B1, Pin 3 is A2, Pin 4 is B2, and so on.