Spinner

From Arcade Otaku Wiki
Revision as of 11:48, 3 October 2012 by Cools (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

A Spinner is a type of control interface used in several arcade titles. To install a spinner, depending on the type, you either need to remove the knob and install it like a joystick, or completely disassemble the spinner and remove the c-ring to release the shaft, and then re-build the spinner around the control panel. When installing the spinner, make sure the encoder wheel doesn't touch the optical switches when in upright position, as this will cause resistance on the wheel and make the spinner difficult to use.

Compatible Games

Title Setup
Arkanoid Left and Right bind to L/R on the harness
Arkanoid - Revenge of DOH Left and Right bind to L/R on the harness
Arkanoid Returns Left and Right bind to L/R on the harness
Block Block Connectors on official Capcom JAMMA adapter
Cameltry Left and Right bind to L/R on the harness
Puzz Loop CN6 pinout 1. +5VDC 2. 1p 3. 2p 4. - 5. - 6. 1p 7. 2p 8. GND [1]
Puzz Loop 2 Connectors on official Capcom JAMMA adapter

Seimitsu LS-29 Pinout

Pin1: X1, Pin2: +5 Volts, Pin3: GND, Pin4: X2[2]

References

External Links