Taito Egret II
Taito Egret II | |
---|---|
Katakana | イーグレット2 |
Rōmaji | IGURETTO II |
Type | Sitdown |
Released | 1996 |
Dimensions | 903 x 750 x 1450 (1765 including Marquee)[1] mm |
Wiring | JAMMA |
Monitor | 29 in 15/24 kHz (Nanao MS9) |
Rotatable | Yes (Has rotate mechanism) |
Weight | 102 kg |
Power Supply | Taito JAMMA PSU (5v/-5v/12v) |
Power | 125 W |
Information
The Egret II cab is popular because of its easy rotate mechanism and monitor with near flawless geometry, and stunning picture in 15kHz.
According to the manual, stock colours for balltops and buttons are Sanwa Violet and Dark Blue, with Sanwa JLF joysticks. This is in contrast to the cabinet flyer, which shows Seimitsu Green and Yellow balltops and buttons, along with LS-40 joysticks fitted with matching colour shaft covers.
In the same way as the Taito Egret 3 and Sammy Atomiswave SD, the Egret II can be easily fitted with a Taito Stereo Amp, albeit with a small wiring change required.
Egret II is not 100% JAMMA standard, with only 3 of the 4 +5V pins connected on the JAMMA connector. This can cause issues with certain boards such as Michael Jackson's Moonwalker.
Additional photos
Manuals
Connectors
Within main cabinet:
F (Stereo harness) - JST NH
S (6th button harness) - JST YL
1 - P1 Button 6 | 2 - P2 Button 6 |
Within Control Panel:
E (Earthing cable) JST YLR-02V Female (Cabinet) <--> JST YLP-02V Male (Control panel)
2 - N/C | 1 - Earth |
J (Player 1) JST YLP-15V Male (Cabinet) <--> JST YLR-15V Female (Control panel)
1 - Start | 2 - Up | 3 - Down | 4 - Left | 5 - Right |
6 - Button 1 | 7 - Button 2 | 8 - Button 3 | 9 - Button 4 | 10 - Button 5 |
11 - Button 6 | 12 - Ground | 13 - N/C | 14 - N/C | 15 - N/C |
K (Player 2) JST YLR-12V Female (Cabinet) <--> JST YLP-12V Male (Control panel)
4 - Left | 3 - Down | 2 - Up | 1 - Start |
8 - Button 3 | 7 - Button 2 | 6 - Button 1 | 5 - Right |
12 - Ground | 11 - Button 6 | 10 - Button 5 | 9 - Button 4 |
Artwork
Instruction strip can hold artwork up to 536 x 85 mm. Marquee can hold artwork 294 x 405mm max (292 to inner edge) - although the maximum size without fouling on the top screw holes is 278 x 405mm.
Notes
PCB mounting board is 447x392x12mm MDF