Molex KK

• 2695 serie: 2.54mm ( .100" ) pitch ( same as JST NH )
• 5239 serie: 3.96mm ( .156" ) pitch with full width ramp

All these are available with different ramps/locking tabs than the models documented here.

Datasheet/Manual

2695 serie Datasheet

Part numbers

2695 serie

• 22-01-2087 - 8 pins
• ...
• 22-01-2167 - 16 pins

Pins

• 08-52-0101

5239 serie

• 0009524044 - 4 pins
• ...
• 0009524154 - 15 pints

pins:

• 0008550104

What they used for

the 2.54mm connectors are an alternative to JST NH connectors.

The 3.96mm connectors are used in a variety of places

• spinner/trackball pcb connectors
• chassis connectors ( WellsGardner )

What they look like

• 

  2695 serie

Removing pins

Super easy - just hold down the locking pin with a fine tweezer or similar, and pull out.

Where to get them

https://www.arcadepartsandrepair.com/product-category/connectors-sockets-pins/100-kk-molex/

https://www.arcadepartsandrepair.com/product-category/connectors-sockets-pins/156-kk-molex/

http://digikey.com

http://mouser.com