Sega Analogue Wire Harness

From Arcade Otaku Wiki
Jump to: navigation, search

The Sega Analogue Wire Harness is a wire harness used to connect analogue controls to various Sega JVS IO boards.

This harness is required to play most JVS games using analog controls like Monkey Ball or Virtua Striker 4.

Sega part number

NOA-60021

Pinout[1][2]

Input

This side of the harness is found under the control panel, in the cabinet control box. The two housing are respectively labelled as D and E.

White 8 pin AMP Universal Power female panel housing
Pin Function Wire color
01 AVCC Yellow/Black
02 AVCC Yellow/Black
03 A/D 0CH Orange/Red
04 A/D 1CH Orange/Blue
05 A/D 2CH Orange/Yellow
06 A/D 3CH Orange/White
07 AGND White/Black
08 AGND White/Black
Yellow 8 pin AMP Universal Power female panel housing
Pin Function Wire color
01 AVCC Yellow/Black
02 AVCC Yellow/Black
03 A/D 4CH Gray/Red
04 A/D 5CH Gray/Blue
05 A/D 6CH Gray/Yellow
06 A/D 7CH Gray/White
07 AGND White/Black
08 AGND White/Black

Output

This side of the harness is connected to the analog connector on the IO board.

26 pin JST RA connector
Pin Function Wire color
01 AVCC Yellow/Black
02 AVCC Yellow/Black
03 A/D 0CH Orange/Red
04 A/D 4CH Gray/Red
05 AGND White/Black
06 AGND White/Black
07 NC (AVCC) N/A
08 NC (AVCC) N/A
09 A/D 1CH Orange/Blue
10 A/D 5CH Gray/Blue
11 NC (AGND) N/A
12 NC (AGND) N/A
13 NC (AVCC) N/A
14 NC (AVCC) N/A
15 A/D 2CH Orange/Yellow
16 A/D 6CH Gray/Yellow
17 NC (AGND) N/A
18 NC (AGND) N/A
19 AVCC Yellow/Black
20 AVCC Yellow/Black
21 A/D 3CH Orange/White
22 A/D 7CH Gray/White
23 AGND White/Black
24 AGND White/Black
25 NC (Not used) N/A
26 NC (Not used) N/A

Found in

Compatibility

  • Sega JVS I/O Boards
  • Sega JVS to JAMMA Convertor type 2

Gallery

References