Adding RCA Sockets for Stereo Amp to Atomiswave

From Arcade Otaku Wiki
Jump to: navigation, search

Original Article written by Akuma :)


To locate the exact solder points - here they are (depending if you need 1 or 2 GND lines):

Aw stereo 1.jpg

You can directly solder it to an RCA socket - this one for example only requires 1 GND line:

Aw stereo 2.jpg

Also, you can solder pins to the MoBo and crimp some wires to easily take it off - should you want that:

Aw stereo 3.jpg Aw stereo 4.jpg

What I did was drill 2 holes on the side near the AW badge:

Aw stereo 5.JPG

Finished!