SNK Neo Candy 25: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
updated with PSU capacitor map, updated information on topper, corrected that this is wired for JAMMA and not MVS |
||
| Line 10: | Line 10: | ||
|width = 600 | |width = 600 | ||
|height = 1200 | |height = 1200 | ||
|wiring = | |wiring = JAMMA | ||
|monitor_size = 25 | |monitor_size = 25 | ||
|monitor_sync = 15/24 | |monitor_sync = 15/24 | ||
| Line 22: | Line 22: | ||
}} | }} | ||
Basically a [[SNK Neo 25|Neo 25]] with different artwork and a | Basically a [[SNK Neo 25|Neo 25]] with different artwork, wired for JAMMA, and a different topper (to account for the JAMMA wiring - no multi-slot support). | ||
The topper is shared with [[SNK Neo Candy 29|Neo Candy 29]]. The topper is meant to house a single marquee. However, if you remove the acrylic glass and the metal plate, behind you will find the four cutouts for NeoGeo mini marquees just like in the Neo 25 / 29. | The topper is shared with [[SNK Neo Candy 29|Neo Candy 29]]. The topper is meant to house a single marquee. However, if you remove the acrylic glass and the metal plate, behind you will find the four cutouts for NeoGeo mini marquees just like in the Neo 25 / 29. | ||
| Line 36: | Line 36: | ||
|- | |- | ||
|} | |} | ||
==Power Supply Capacitor Map / List== | |||
[[File:S8xa500.jpg|thumb|left|Omron S8XA-500]] | |||
<pre> | |||
Capacitor Diameter Qty Location | |||
1uF 50V 4mm 1 C54 | |||
82uF 25V 6mm 1 C62 | |||
220uF 10V 6mm 1 C72 | |||
330uF 200V 25mm 1 C4 | |||
560uF 35V 13mm 1 C61 | |||
680uF 16V 10mm 1 C71 | |||
1200uF 10V 10mm 1 C53 | |||
2200uF 10V 13mm 2 C51, C52 | |||
</pre> | |||
Credit to nem for the capacitor map! | |||
[[Category:SNK]] | [[Category:SNK]] | ||
Latest revision as of 07:41, 22 October 2025
| Neo Candy 25 | |
|---|---|
![]() | |
| Katakana | ネオキャンディー25 |
| Rōmaji | NEOKYANDII25 |
| Type | Sitdown |
| Released | 199x |
| Dimensions | 890 x 600 x 1200 mm |
| Wiring | JAMMA |
| Monitor | 25 in 15/24 kHz |
| Rotatable | Yes |
Basically a Neo 25 with different artwork, wired for JAMMA, and a different topper (to account for the JAMMA wiring - no multi-slot support).
The topper is shared with Neo Candy 29. The topper is meant to house a single marquee. However, if you remove the acrylic glass and the metal plate, behind you will find the four cutouts for NeoGeo mini marquees just like in the Neo 25 / 29.
Control panel 1P / 2P connector pinout
| Up (brown) | Down (red) | Left (orange) | Right (yellow) |
| A (green) | B (blue) | C (purple) | D (grey) |
| NC | NC | GND (black) | Earth GND (green) |
Power Supply Capacitor Map / List

Capacitor Diameter Qty Location 1uF 50V 4mm 1 C54 82uF 25V 6mm 1 C62 220uF 10V 6mm 1 C72 330uF 200V 25mm 1 C4 560uF 35V 13mm 1 C61 680uF 16V 10mm 1 C71 1200uF 10V 10mm 1 C53 2200uF 10V 13mm 2 C51, C52
Credit to nem for the capacitor map!
