Sammy Atomiswave SD: Difference between revisions
No edit summary |
No edit summary |
||
| Line 47: | Line 47: | ||
*[[Media:AtomiswaveParts.pdf|Parts Manual]] | *[[Media:AtomiswaveParts.pdf|Parts Manual]] | ||
*[[Media:e2e3awsdmeasurements.jpg|Cabinet Dimensions]] | *[[Media:e2e3awsdmeasurements.jpg|Cabinet Dimensions]] | ||
*[[ | *[[media:M3129DB1-72.pdf|Wei-Ya M3129D Monitor Schematic]] | ||
== Cabinet Art == | == Cabinet Art == | ||
| Line 54: | Line 54: | ||
*[[Media:Awsd instruction insert.zip|Instruction Space Insert (vector)]] | *[[Media:Awsd instruction insert.zip|Instruction Space Insert (vector)]] | ||
*[[Media:Atomiswave.Insert.Coin.100.Yen.Vector.pdf|100 Yen Sticker (vector)]] | *[[Media:Atomiswave.Insert.Coin.100.Yen.Vector.pdf|100 Yen Sticker (vector)]] | ||
*[[Media:AWSD-Weight-Sticker.zip|Weight Sticker (vector)]] | *[[Media:AWSD-Weight-Sticker.zip|Weight Sticker (vector)]] | ||
*[[Media:AWSD-Indoor-sticker.zip|Indoor Sticker (vector)]] | *[[Media:AWSD-Indoor-sticker.zip|Indoor Sticker (vector)]] | ||
[[Category:Sammy]] | [[Category:Sammy]] | ||
Revision as of 21:11, 23 March 2025
| Sammy Atomiswave SD | |
|---|---|
 | |
| Katakana | アトミスウェイブＳＤ |
| Rōmaji | ATOMISUWEIBUSD |
| AKA | AWSD, Atomiswave Sitdown |
| Type | Sitdown |
| Released | 2003 |
| Dimensions | 903 x 750 x 1450 (1765 including Marquee) mm |
| Wiring | JAMMA/Half JVS |
| Monitor | 29 in 15/24/31 kHz (Wei-Ya M3192D) |
| Rotatable | Yes |
| Weight | 102 kg |
| Power Supply | Wei-Ya P271 |
Dedicated candy cab for the Sammy Atomiswave, using the licensed shell of a Taito Egret 3 in combination with a Wei-Ya monitor and power supply.
Information
This cab features a Tri-sync monitor so it can be used for 31K NAOMI and Atomiswave operation. It uses a JVS power supply that supplies 3.3v as well as 5v and 12v. It is mainly JAMMA with some JVS functionality, but in order to use a NAOMI, a JVS IO converter such as the Capcom or Sega IO is required. It features a VGA connector for connecting a JVS board to already.
The default control panel is a 1L6B with a custom memory card reader, used for some Atomiswave games. The control panel housing is compatible with Taito Egret 2, Egret 3, and also Sega Astro/Blast/Naomi Panels. These are commonly seen fitted with a 2L12B Egret 3 panel for two player functionality.
The cabinet can be upgraded with a sound amp easily as it is wired with the necessary 12v and speaker connections for a Taito Stereo Amp.
Additional photos
-
Front -
Left -
Right -
Back -
PCB & Coin doors open -
Front monitor cover open -
Control panel open -
Side Profile
.jpg)
