SNK Neo Candy 25

From Arcade Otaku Wiki
Revision as of 07:41, 22 October 2025 by Kazuo (talk | contribs) (updated with PSU capacitor map, updated information on topper, corrected that this is wired for JAMMA and not MVS)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Neo Candy 25
Katakana ネオキャンディー25
Rōmaji NEOKYANDII25
Type Sitdown
Released 199x
Dimensions 890 x 600 x 1200 mm
Wiring JAMMA
Monitor 25 in 15/24 kHz
Rotatable Yes


Basically a Neo 25 with different artwork, wired for JAMMA, and a different topper (to account for the JAMMA wiring - no multi-slot support).

The topper is shared with Neo Candy 29. The topper is meant to house a single marquee. However, if you remove the acrylic glass and the metal plate, behind you will find the four cutouts for NeoGeo mini marquees just like in the Neo 25 / 29.

Control panel 1P / 2P connector pinout

Up (brown) Down (red) Left (orange) Right (yellow)
A (green) B (blue) C (purple) D (grey)
NC NC GND (black) Earth GND (green)

Power Supply Capacitor Map / List

Omron S8XA-500
Capacitor     Diameter  Qty  Location

1uF 50V       4mm       1    C54
82uF 25V      6mm       1    C62
220uF 10V     6mm       1    C72
330uF 200V    25mm      1    C4
560uF 35V     13mm      1    C61
680uF 16V     10mm      1    C71
1200uF 10V    10mm      1    C53
2200uF 10V    13mm      2    C51, C52

Credit to nem for the capacitor map!